Changing the film speed setting – Canon EOS 500QD User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Film Speed Setting
When using non-DX coded film, or when you wish to set the film speed
(ISO number) yourself, the film speed can be selected manually in the
following way. The range of possible settings is from ISO 6-6400.
1. Set the command dial to
iso.
• The letter ISO and the film speed num
ber will appear on the display panel.
2. Turn the electronic input dial to set
the desired film speed.
3. Reset the command dial back to the
desired photographic mode.
The film speed setting will remain at the previous set value until a DX coded film is loaded
into the camera or until the film speed is reset.
48