Inserting the battery pack, Open the battery chamber cover, Insert the battery into the camera – Canon EOS D60 User Manual
Page 24: Close the cover, Battery level icons, Inserting and removing the battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting and Removing the Battery Pack
Inserting the Battery Pack
Load a fully charged BP-511 battery pack into the camera.
Open the battery chamber cover.
# Slide the lever in the direction shown by the
arrow in the diagram, and open the cover
as shown.
Insert the battery into the camera.
Make sure the battery pack is facing the
right way, and insert it into the battery
chamber.
® Insert the battery pack until it locks into
place.
Close the cover.
Press the cover closed until it clicks shut.
O
Battery Pack BP-512 cannot be used with this camera.
Battery Level Icons
The level of charge remaining is shown in three stages when the Main Switch is set to <ON>.
(-29)
4m]: Charge is sufficient,
da : Charge is low.
\ I /
CZH : Battery pack must be charged.
If the level of charge remaining runs out when you are using the menu screen or
playing back an image, a no battery warning appears on the LCD monitor. When
this occurs, remove the battery and charge it.
24