Program ae, Set the mode dial to <p, Focus on the subject – Canon EOS D60 User Manual
Page 68: Check the display, Take the picture, P program ae
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Program AE
F-i-
Like <0> (Full Auto) mode, this is a general-
purpose picture-taking mode. The camera automati
cally sets the shutter speed and aperture value to
suit the scene’s brightness. This is called Program
AE.
* p
stands for Program
* AE stands for Auto Exposure
Set the Mode Dial to <P>.
Focus on the subject.
® Press the shutter button down halfway.
The AF point achieving focus will flash in
red and the beeper will sound. The focus
confirmation light <•> at the lower right will
also light.
C C -2.1.f.1.2+ O
-i.'-i
I
Check the display.
The shutter speed and aperture value are
determined automatically, and displayed in
the viewfinder and on the LCD panel.
® If the shutter speed and aperture values are
not blinking, the exposure is correct.
If either is blinking, see “Exposure Warn
ings” (^132).
Take the picture.
# Compose the picture, then press the shutter
button down fully.
6 8