Turn the iris ring to operate the iris manually, Use this switch to start or stop the vtr, Adjusts the iris gain – Canon YJ12X6.5B IRS-A User Manual
Page 17: This switch is used for shuttle-shot function, Determines the mounting position of the lens
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® Connector for Remote Zoom Control
Zooming is performed by remote control when this connector is used to connect the
unit to an optional control unit for zoom operations.
Normally, this connector is covered with a cap.
(|J) Iris Ring
Turn the iris ring to operate the iris manually.
® Flange Back Lock Screw/Flange Back Adjusting Ring
Loosen this screw and turn this ring to adjust the flange back.
® VTR Switch
Use this switch to start or stop the VTR.
(Q) Iris Gain Adjusting Trimmer
Adjusts the iris gain.
(ID
DIP Switches
Use these DIP switches for the settings related to the shuttle-shot function.
(|D Shuttle Memory Position Setting Knob
Use this knob to set the shuttle memory position.
® ShtI Button (Shuttle-Shot Button)
This switch is used for shuttle-shot function.
(|D Positioning Pin
Determines the mounting position of the lens.
(||) Extender Lever
2X built-in extender is in and out by swing of this lever.
45