Angle finder – Canon E 77 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
51
Angle Finder
Use the optional Angle Finder LF-E7 to record objects at a low angle.
1
Slide and hold FINDER
RELEASE switch in
direction of arrow and
remove viewfinder.
Finder Release
Switch
S
Attach angie finder.
3
Set image invert switch
to ANGLE FINDER
position.
• Tape has been placed over the image
invert switch for protection during pack
aging. When using the image invert
switch for the first time, peel off protec
tive tape.
4
Turn camera on, press
START/STOP button
and begin recording as
normal.
• Open eyecup for easier viewing and
viewing from a distance.
• Follow focusing procedure described on
p.14.
• Your view will be obscured unless image invert switch is set property.
• The RS-E7 Rain Shield cannot be attached when angle finder is in use.
• Be sore to set image invert switch back to normal when reattaching camera
finder.