LG L1810ER - Manual (Page 14)

Installation
Cabinet Installation
1j Open the window. Mark a line on the center of the
window stool between the side window stop
moldings.
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock nut.
Garrire
Bolt
-Support
Bracket®
hH^Lock nut®
^ Attach the sill bracket to the window sill using the
screws (Type B).
Carefully place the cabinet on the window stool
and align the center mark on the bottom front with
the center line marked window stool.
Cabinet
Track hole
Support
Bracket @
Carriage bolt
and lock nut
Machine screw(Type D)
and lock nut
Outer edge
of window
sill
® (Type B)
SHI bracket @
^ Using the M-screw and the lock nut, attach the
support bracket to the cabinet track hole. Use the first
track hole after the sill bracket on the outer edge of
the window sill. Tighten the carriage bolt and the lock
nut. Be sure the cabinet slants outward.
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 1/2" of water in bottom pan.
^ Pull the bottom window sash down behind the Top
retainer bar until they meet.
l.VtW'MJ : 1. Do not pull the window sash down so tightly
that the movement of Frame curtain is
restricted.
Attach the cabinet to the window stool by
driving the screws (Type B) through the
cabinet Into window stool.
2. The cabinet should be Installed with a very
slight tilt downward toward the outside.
Window sash_¡jpper Guide
Cabinet
Frame curtain
Foam-PE
14 Room Air Conditioner