CyberData 930095K - Manual (Page 19)

Installing the VoIP Ceiling Speaker
Configure the Speaker Parameters
Operations Guide 930095K CyberData Corporation
13
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the speaker if appropriate.
4. Connect the speaker to the target network.
5. From a system on the same network as the speaker, open a browser with the new IP address of
the speaker.
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-5. Network Setup Parameters
Web Page Item Description