CyberData 930095K - Manual (Page 29)

Installing the VoIP Ceiling Speaker
Restore the Factory Default Settings
Operations Guide 930095K CyberData Corporation
23
Figure 2-12. Reboot System Section
2. Click Reboot. A normal restart will occur as per Section 2.2.2.1, "Status LED" .
2.6 Restore the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state.
Each speaker is delivered with factory set default values for the parameters indicated in Table 2-10 .
Use the RTFM switch on the speaker face to restore these parameters to the factory default settings.
Note When you use the RTFM switch, the factory default settings are restored for only the
parameters indicated in
Table 2-10 . The other parameters in the current speaker
configuration will remain unchanged.
Table 2-10. Factory Default Settings
Parameter Factory Default Setting
IP Addressing static
IP Address 192.168.3.10
Web Access Username admin
Web Access Password admin
Subnet Mask 255.255.255.0