CyberData 930095K - Manual (Page 31)

25
Operations Guide 930095K CyberData Corporation
Appendix A: Mounting the Speaker
A.1 Mount the Speaker
Before you mount the speaker, make sure that you have received all the parts for each speaker. Refer
to
Table A-1 and Table A-2 .
To mount the speaker:
1. Use the TEMPLATE to cut the speaker hole and prepare holes for the screws ( Figure A-1 ). This
template is located on the back page of the Installation Quick Reference Guide that is delivered
with each speaker.
Table A-1. Drop Ceiling Mounting Components (Part of the Accessory Kit)
Quantity Part Name Illustration
3 #8 Nylon Thumb Nuts
3 #8 Fender Washers
3 8-32 x 1 1/4" Mounting Screws
Table A-2. Drywall Mounting Components (Part of the Accessory Kit)
Quantity Part Name Illustration
3 Plastic Ribbed Anchors
3 #6 Sheet Metal Screws