Acolyte RibbonLyte in Recessed Channel - Manual (Page 5)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P S 9 - 1 0
9
10 Slide or snap the lens (F) into place.
PA G E 4
Apply the RibbonLyte (E) by placing one
end of the strip at the end of the double-
sided tape (D) inside the channel (A) then
slide your finger along the RibbonLyte (F) to
make sure there is firm contact and that the
tape adheres well.
(E)
(F)
(F)
(A)