Acolyte RibbonLyte without Channel - Manual (Page 7)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
B - M O U N T N O N - W AT E R P R O O F R I B B O N LY T E W I T H Z I P T I E PA D S
1 2
Clean the mountain surface free of dust
and debris using a wet cloth. For metal
mounting surfaces use rubbing alcohol (A)
to wipe clean. After surface is dry, apply 1/16” double-sided
tape (B) to the desired mounting path of
your RibbonLyte. If mounting to a wall, use
a level to ensure a straight line.
PA G E 6
(A)
(B)
3 4
Remove backing from double-sided tape
(B). Take the backing off the zip tie pads (C).
(B)
(C)