Acolyte Waterproof RibbonLyte without Channel - Manual (Page 8)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L B - - S T E P S 9 - 1 0
10
9
Snip the tail off the zip tie (C) with scissors
or wire snips.
Wrap the zip tie (C) around the RibbonLyte
(D) and slide the tail of the tie through the
other end until it holds its position and has a
snug fit.
PA G E 7