AItech ProA/V Media Extender - Wireless HDMI - Manual (Page 19)

18
(6) Press the Source button, until you see the video being broadcasted from your device.
(7) If you have electronic devices such as a cordless phone, wireless access point/ router sharing
the 5GHz channel frequency, when you use it near the ZWD-2422, you may experience
disturbed picture or diminished sound quality. Press the CHANNEL button on the remote
control to change the ProA/V Media Extender Wireless HDMI to different channels.
Note:
A. Changing the ProA/V Media Extender Wireless HDMI to a different wireless channel:
1. Enter the wireless RF
channel adjustment mode 2. Changes to the next
available RF wireless channel
3. Exit the wireless
RF channel
adjustment mode
Method
Press the CHANNEL button on
the Remote Control Unit (RCU)
for current channel status
display. Press the CHANNEL button on
the RCU again within 5
seconds to switch channel
randomly.
No button is pressed
for 5 seconds.
OSD Display
Status
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 [CH 8] WIDE Off 1280x1024
Press again to change Channel
Exit.