AVer H300 user manual - Manual (Page 35)

31
ENGLISH
To Setup the Network
1. Select Network and press .
You may also set the network setting in Network
selection. Go to Setting > System Settings >
Network.
2. Select the maximum transmitting and receiving
bandwidth and press to make a selection.
 Max. Transmitting/Receiving Bandwidth -
allows you to specify the maximum bandwidth
of the outbound and inbound calls.
H300/H100 system supports up to 4Mb.
 Auto Call Quality - enables you to select
default outbound/inbound bandwidth. This setting
will be used when Auto is selected in the Call
Quality setting.
To Setup the Date and Time
1. Select Date and Time and press .
2. Select the Date and Time format you prefer and
enter the date and time value.