Tampering – AVer CM5000 User Manual
Page 126
Advertising
119
2s, 3s, 4s, or 5s) for cross line displaying on screen.
6.
Click Apply to save the settings.
Tampering
Select Enable tamper detection to enable tampering function. And, alarm will trigger when the
following situation has occurred.
Spray-painting: Alarm is triggered when the camera has detected the painting sprayed on
the camera
’s view for over 2 seconds.
Intention Block /Cover: Alarm is triggered when the camera has detected the camera
’s
view being blocked intentionally over 2 seconds.
Accidental redirection: Alarm is triggered when someone re-directs the position or
direction of camera accidentally.
Defocusing: Alarm is triggered when the camera has lost focus.
Advertising