AVer CM5000 User Manual
Page 55
48
3.
Set the storage path. Before starting to set the backup schedule, user needs to set a
storage path.
Select Storage Setting tab. In Storage Setting page, click Add button and browse the
storage path location to add a storage path. The storage path can have more than one but
at least one storage path is required for backup.
In Storage Setting page, user can setup logs data and hard disk space recycle. Click
Apply to save the settings.
Delete Recorded Data After Days: If user wants the system to automatically
erase the data after a certain days, enable the Delete Recorded Data After check
box and enter the numbers of days in Days text box.
Delete Log Data After Days: If you want the system to automatically erase the
event and alarm log after a certain days, enable the Delete Log Data After check
box and enter the numbers of days in Days text box.
Recycle: Mark to over write hard disk from older data when hard disk space is full.