1 configure the remote nvr/dvr server, 1 system setup, Configure the remote nvr/dvr server – AVer CM5000 User Manual
Page 88: System setup, Chapter 5.1
81
6.1
Configure the Remote NVR/DVR Server
6.1.1
System Setup
1. Click Setup tab to call out setup mode of CMS system.
2. Click of CMS Setting and click of NVR Management to expand the NVR/DVR server
list.
3. Select the NVR/DVR server that user wants to configure and switch to the NVR/DVR server
setup window.
In Setup mode, user should see the System Information dialog box is displayed at the first
place. In System Information dialog box, it displays the information of Server name, Current
Firmware Version, IPCam Module, Received Bandwidth, Transmitting Bandwidth, and
Temperature.
The setup sections are divided into System Setting, Camera Management, Recording
Management, Alarm Setting, User Setting, and Schedule Setting.
In the following chapters will describe all.