B&M 40505 BRACKET AND LEVER KIT, 4R100/E40D - Manual (Page 2)

STEP 1. Drain transmission fl uid.
STEP 2. Disconnect shift linkage
from transmission shift lever.
STEP 3. Remove two (2) bolts and remove
Neutral Position Sensor.
NOTE: On some applications, Neutral
Position Sensor will be rotated 180 degrees
by design. The kit is designed to adapt to
both versions. Sensor to be installed in same
orientation as removed.
TOOLS:
Drive, Extension, & Socket (8mm).
TOOLS
DRIVE EXTENSION SOCKET
1/4”, 3/8” 1/4”, 3/8” 8MM
1/4”
SOCKET SOCKET DIAGONAL
10MM 13MM CUTTERS
1/4”, 3/8” 1/4”, 3/8”
PLASTIC WRENCH TORQUE
MALLET 17MM, 21MM WRENCH