B&M 40505 BRACKET AND LEVER KIT, 4R100/E40D - Manual (Page 4)

STEP 8. Remove selector shaft from case.
STEP 9. Slide B&M Selector Shaft into case.
Engage B&M Shaft with inner shift
lever and install nut. Use B&M Selector
Lever to visualize position of selector
shaft.
When inner shift lever is in the park
position, the selector lever should be
pointed downwards and to the left.
(Refer to picture on the right).
STEP 10. Install Selector Lever Retaining Pin.
TOOL: Plastic Mallet
* DO NOT HAMMER PIN ALL THE WAY
INTO THE CASE!
Pin should stick out from case
approximately 1/4” for future removal.
STEP 11. Install Detent Spring.