Brondell FreshSpa Dual Temperature Bidet - Manual (Page 8)

2) Hookup Cold Water Connection: Turn
Off Water Supply Valve and Flush Toilet
a. Turn off water supply at the wall to stop
flow of water.
b. Flush toilet and hold down handle to
completely empty toilet tank.
c. Disconnect water supply hose from
the fill valve under the toilet tank.
3) Connect 7/8” T-Valve to Water Supply
Line and Fill Valve Under Toilet Tank.
a. Install the 7/8” T-valve with the small
rubber washer with raised lip to the
incoming water connection on the bottom
of your toilet tank. Be sure to place the flat
edge of the rubber washer into the T-Valve
against the metal with the raised lip facing
the toilet tank connection.
b. Connect the cold water supply line
coming from the wall to the bottom of
the T-valve using the small flat rubber
washer (if needed).
Installation
6
Step 2a
Step 2c
Step 3a & 3b