Cowon Systems iAUDIO G3 - Manual (Page 14)

iAUDIO G3
26
iAUDIO G3
27
Line-in Recorder (Direct Encoding)
We will describe the example of direct encoding between CDP and iAUDIO.
When iAUDIO is not in LINE-IN Recorder Mode, press the lever briefly to enter
Mode menu, and select LINE-IN Recorder. Press + or - or press the PLAY button
to select Line-in Recorder. iAUDIO enters Line-in Recorder mode.
Connect the headphone jack of CDP with the Line-In jack of iAUDIO with a
bi-directional stereo jack cable.
Press the REC button to switch iAUDIO to recording standby status.
(For the Autosync setting procedure, see Autosync Features in Page 38.)
iAUDIO automatically monitors the LINE-IN jack and pauses recording until
audio signals are received.
When you press the PLAY button of CDP, iAUDIO detects signals coming in
through the LINE-IN jack and starts recording.
The file is recorded as L***.mp3 in the 『LINE IN』 folder under the
『
RECORDS』. (“***” represents a 3-digit consecutive number.)
To finish recording, press the REC button again.
For information on changing the recording quality, see page 37 of this manual.
After recording, you can press and hold the lever to enter Navigator mode for
more convenient features.
• Play Now: Plays the track immediately.
• Add to List: Adds the track to Playlist.
• Intro: Plays only the intro part of the tracks.
• Delete: Completely removes the track from Flash memory.
To play recorded files more conveniently using Fast Forward and Fast Rewind
features, change to MP3 Player mode, and select L***.mp3 files to play in the
『
Linein』 folder under the 『Records』 folder.
Simple Operations by Mode
Line-in Recorder Mode
Simple Operations by Mode
Line in Recorder Mode