Cowon Systems iAUDIO G3 - Manual (Page 9)

iAUDIO G3
16
iAUDIO G3
17
Basic Operations
1. Power On/Off
• When you press and hold the PLAY button, the iAUDIO logo appears and iAUDIO turns on.
• When you press and hold the PLAY button again, iAUDIO turns off. (You cannot power off
iAUDIO while recording or in USB mode.)
• You can turn off iAUDIO automatically by setting Auto Off or Sleep Timer.
2. Connecting USB
■ Connecting USB
iAUDIO enters USB mode when you connect the USB cable while iAUDIO is turned on or in use.
(When you connect the USB cable while recording, the recording stops automatically and iAUDIO
enters USB mode.)
When the USB cable is connected, iAUDIO does not use the battery but is powered through the USB
cable.
■ Disconnecting USB
Disconnect the device from the Windows tray bar and pull out the USB cable.
Basic Operations
Power On/Off / Connecting USB
Push the PLAY button iAUDIO powers on and the iAUDIO logo appreas. To turn iAUDIO off, press and hold the PLAY button.
Display when USB is connected. splay when iAUDIO is reading data. Display when iAUDIO is writing data.
3. Basic Operations for Mode Change There are four modes:
Digital Audio, FM Radio, Voice Recorder, and Line-in Recorder
Basic Operations
Basic Operations for Mode Change
Example: When changing from Digital Audio to FM Radio Mode.
Enter Mode Menu
Press the Mode button
to enter Mode menu.
Digital Audio Mode
Select Mode
Push ◀◀ or ▶▶ to select FM Radio Mode.
Enter/Cancel Mode
Press the lever to enter the selected
mode or return to the previous mode
by pressing the REC button.
■ Open Mode Select Screen
• To change to another mode, press the MODE button to enter Mode menu.
• 4 modes are displayed for you to select from.
■ Moving Between Modes
• Press
◀◀
or
▶▶
to move to the desired mode.
■ Selecting Mode
• After navigating to the desired mode using menu, press the lever or PLAY button to select the mode.
• The selected mode screen is displayed and the mode change is complete.
■ Canceling Mode Change
• If you wish to cancel mode change and return to the previous mode, press the REC button.
• The selected mode screen is displayed and the mode change is cancelled.