Cowon Systems iAUDIO G3 - Manual (Page 21)

iAUDIO G3
40
iAUDIO G3
41
Information
Version
• Displays the current version of the firmware embedded in iAUDIO.
Memory (Used / Total Memory Capacity)
• Displays information on the flash memory in iAUDIO.
• You can check usage and total memory capacity.
• iAUDIO Flash Memory shares some parts with the system memory.
When you exclude the memory taken by the system that is required for normal operation of iAUDIO,
the flash memory that is displayed may be less than its total capacity.
• For example, about 242MB is the normal capacity from 256MB products.
Battery (Remaining Battery Capacity)
• Displays the remaining capacity of the battery in iAUDIO as a V value.
Detailed Descriptions by Menu
Information
Troubleshooting
Symptom Action Description
iAUDIO does not
power on.
Check if the HOLD button is in
the locked position.
Try again after pushing the HOLD
button to OFF.
When the HOLD button is in locked
status, iAUDIO buttons do not work.
Check if the battery is loaded in
the right direction.
Replace the battery with a new
one.
Remove the battery and insert
it again.
iAUDIO does not work if the polarity of
the battery is reversed.
iAUDIO does not work when the battery
is exhausted.
Check if there are any foreign objects
obstructing contact with the battery and
remove them if there are any.
There is no sound. Check if there are any MP3 files
in memory.
iAUDIO does not work when there are no
saved files in it.
Check if the HOLD button is in
locked position.
Try again after setting the HOLD
button OFF.
iAUDIO buttons do not work when the
HOLD button is in locked status.
FM Radio does not
work
FM Radio reception may not be good inside buildings, subways or moving cars.
Listening to FM Radio may be impossible in areas shaded from radio transmis-
sions.
If FM Radio does not work in areas where radio reception is possible, the recep-
tion module may be in error. In this case, please call one of our service centers.
Characters in LCD
are distorted.
Set the language of iAUDIO to English and ID3 tag to Filename, and retry. If
the problem persists, check the product with our service center. However, if the
same symptom occurs in other iAUDIO products of the same model, it may be
because iAUDIO was developed on Korean Windows and some special fonts or
characters may be distorted.