2 delivery scope and transport inspection, 3 unpacking, 4 disposal of the packaging – CASO Germany D10 Multi Opener User Manual

Page 29: 5 setup location requirements

Advertising
background image

Caso D10

29

11.2 Delivery scope and transport inspection

As a rule, the D10 is delivered with the following components:

• D10

• Operating Instructions

Please note

► Examine the shipment for its completeness and for any visible

damages.

► Immediately notify the carrier, the insurance and the supplier about any

incomplete shipment or damages as a result of inadequate packaging
or due to transportation.

11.3 Unpacking

To unpack the device, proceed as follows:

• Remove the device out of the carton and remove the packaging

material.

11.4 Disposal of the packaging

The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.

Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging
materials that are no longer required to “Green Dot” recycling collection
points for disposal.

Please note

► If possible, keep the original packaging for the device for the duration of

the guarantee period of the device, in order that the device can be re-
packaged properly in the event of a guarantee claim.

11.5 Setup location requirements:

• In order to ensure the safe and trouble-free operation of the device, the

setup location must fulfil the following prerequisites:

• The device must be set up on a firm, flat, horizontal surface with

sufficient load-bearing capacity.

• Choose the setup location in such a way that children cannot reach the

device.

• The device is not intended to be installed in a wall or a built-in

cupboard.

Advertising