CASO Germany D10 Multi Opener - Manual (Page 35)

Caso D10 35
Please note
► The motor and internal gears of your can opener unit are permanently
lubricated at the factory for lifetime service and require no further
attention. The cutting blade is made of hardened steel and will last for
years under normal use. Do not attempt to sharpen.
15 Troubleshooting
This chapter provides you with important notices with regard to operating
the device. Observe the following notices to avoid dangers and damages:
15.1 Security advices
Attention
► Repairs of electrical appliances must be carried out by qualified
personnel who are trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable
hazards for the user and damage the machine.
15.2 Troubleshooting
Error Possible cause Troubleshooting
The can opener
doesn't work.
Mains plug is not connected
correctly.
Plug into the mains.
Contact of the lever is defect. Contact the customer service.
Blades don't
become sharp.
Cutting blade is worn. Contact the customer service.
Attention
► If above mentioned steps don't solve the problem, please contact your
customer service.
16 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable
materials. However, they also contain damaging substances, which were
necessary for their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly,
they could be detrimental to human health and the environment.