Catler ES 8013 - Manual (Page 35)

35
CARE & CLEANING
CLEANING THE OUTER HOUSING / CUP
WARMING PLATE
The outer housing and tray warming plate
can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
CLEANING THE DRIP TRAY
The drip tray should be removed, emptied
and cleaned at regular intervals, particularly
when the drip tray full indicator is showing
EMPTY ME!.
Remove grid, compartments and EMPTY
ME! indicator from the drip tray. Dispose
of the grounds from the dry compartment
into the bin. Wash the drip tray with warm
soapy water, using a non-abrasive washing
liquid, rinse and dry thoroughly. The EMPTY
ME! indicator can be removed from the drip
tray by pulling upwards to release the side
latches.
The drip tray base and cover are dishwasher
safe.
CLEANING THE STORAGE TRAY
The storage tray is located behind the drip
tray and is pulled forward when you slide the
drip tray out. Clean the tray with a soft, damp
cloth (do not use abrasive cleansers, pads or
cloths which can scratch the surface).
STORING YOUR MACHINE
Before storing, press the POWER button to
off , turn the steam dial to STANDBY switch
Off at the power outlet and unplug.
Remove unused beans from the hopper,
clean the grinder (see page 33), empty the
water tank and the drip tray.
Ensure the machine is cool, clean and dry.
Insert all accessories into position or into the
storage tray.
Store upright. Do not place anything on top.
WARNING:
Do not immerse power cord, power
plug or appliance in water or any
other liquid. The water tank should
never be removed or completely
emptied during decalcifying.