Catler ES 8013 - Manual (Page 37)

37
TROUBLESHOOTING
TROUBLESHOOTING
Problem POSSIBLE CAUSES WHAT TO DO
When the machine
is switched On, the steam
lights is fl ashing. • Steam dial is not in
STANDBY position Turn the Steam dial to
‘STANDBY’ position.
Machine will commence
normal heat up procedure.
Coff ee does not run
through • Machine is not turned
On or plugged in Ensure the machine
is plugged in, switched On
at the power outlet and the
POWER button is pressed
On.
• Water tank is empty Refer to ‘Filling The Water
Tank’, page 16
• Coff ee grind is too fi ne Ensure you use a suitable
espresso grind. Refer to
‘Setting the Grind Size’ on
page 16 and 25.
• Too much coff ee in the
fi lter Refer to ‘Adjusting the Grind
Amount’, page 17 and 26.
• Coff ee tamped too
fi rmly
Refer to ‘Coff ee Dose and
Tamping’ on page 17
and 26.
• The fi lter is blocked Clean the fi lters. Refer to
‘Cleaning The Filters’,
page 34.
Coff ee runs out too
quickly • The coff ee grind is too
coarse
Ensure you use a suitable
espresso grind. Refer to
‘Setting the Grind Size’ on
page 16 and 25.
• Not enough ground
coff ee in the fi lter Refer to ‘Adjusting the Grind
Amount’, page 17 and 26.
• Ground coff ee not
tamped fi rmly enough
Refer to ‘Coff ee Dose and
Tamping’, page 17 and 26.