CellarPro AH6500 - Manual (Page 6)

6
Installation Instructions
Step 1: Installing humidifier mounting brackets.
Install humidifier mounting brackets using #8 phillips head sheet metal screws. From the box of accessories
remove three brackets and the screws. The three brackets get mounted onto the Evaporator Module as shown
(left side facing air intake). Please make sure to mount the unit on the cold side, which is marked and on the side
opposite the controls. The brackets will form a sleeve for the humidifier to slide into. Locate the humidifier power
supply leads: black lead "80" and white lead "81". These leads will be pulled through the humidifier and
connected later in the process.
Step 2: Preparing the humidifier module for mounting.
From the humidifier in the box remove the humidifier access cover, internal screen, and water panel.
Right
mounting
bracket
Left
mounting
bracket
Humidifier
power supply
leads
Bottom
mounting
bracket
Humidifier
with access
cover
removed
Internal screen
Water panel
Important: Note
orientation of
water panel.
Distribution tray
must be on top
when reinstalled.