CellarPro AH6500 - Manual (Page 8)

8
Step 4: Making the electrical connection to the Air Handler.
Connect humidifier power leads - black "80" to black, white "81" to white. Secure with cord clamp.
Step 5: Connecting the water supply to the humidifier.
Install 1/4" copper water line using compression fitting and flare nut to the water connection on the bottom of the
humidifier. Install humidifier drain line by sliding 1/2"ID flex tubing onto drain connection stub.
Power leads
from
humidifier
Feed power leads
from evaporator
module through to
back of humidifier and
plug into power leads
from humidifier.
Plug in
male/female
cord
connectors
Flare nut
Compression
fitting
1/4" water
supply line
Drain hose
connection stub.
Slip fit using 1/2"ID
flexible drain
tubing. Do not use
hose clamps as
they will damage
the coupling.