BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas - Manual (Page 2)

Boondocker Performance www.boondockers.com 208-542-4411 2010 M8 Turbo Kit Instructions 2
Revised 9/30/2010
Important Information Before Installing This System:
The 2010 -2011 M8 will require a head modification to run pump gas call Boondocker for
more information.
Before you begin your turbo install, read through these instructions to determine if you are
comfortable installing this system. If not please take it to an experienced mechanic for your
install. It is also a good idea to check the kit contents to verify all parts were provided in the kit
before getting started. This install requires time and patience. Do not rush the installation, if you
have any questions on your installation please contact Boondocker tech support at 1-877-522-
7805.
Step 1: Tear Down
Parts Needed: Tools Needed:
None Basic tool set
Air saw
A. Remove hood and side panels
B. Remove pipe and can (remove the
stock rubber mount from the exhaust
can we will need this later).