Step 3: install the air density advantage kit, Step 5: muffler – BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas User Manual
Page 6
Advertising
BoonDocker Performance
www.boondockers.com
208-542-4411
2010 M8 Turbo Kit Instructions
6
Step 3: Install the Air Density Advantage Kit:
Parts Needed; Tools Needed:
ADA kit bag w/ instructions Basic tool set
Step 4: Installing the Control Box (See Control Box
Instuctions):
Parts Needed: Tools Needed:
Control Box w/instructions Basic tool set
Step 5: Muffler
Parts Needed: Tools Needed:
Muffler Basic tool set
5- 8mm x 25mm Allen head bolts 3” hole saw
Spring tab Die grinder
¼” x ½” bolt with lock nut 2 ¼” hole saw
Muffler support with rubber bumper
2- Aluminum rivets
4- Gold exhaust springs
Turbo oil tank assembly
12” of heat tape
A. Using the provided 12” piece of heat tape.
Wrap the coolant line as shown in picture.
Advertising
This manual is related to the following products: