BoonDocker ARCTIC CAT: EZ JACKER 1.9 User Manual
Page 2
Advertising
1. Remove side-panel on clutch side by removing the
cotter pin located behind the upper a-arm.
2. Un-fasten the dzus fastener on the bottom of the rear
cowl next to the footwell.
3. Pull back the cowl and locate the MAP sensor. Re-
move the stock connector from the MAP sensor.
4. Plug the matching EZ-Jacker connector into the MAP
sensor and the stock MAP sensor connector into the
other matching EZ-Jacker connector.
5. Locate the stock EFI connector.
6. Plug the matching EZ-Jacker connectors inline with
the EFI connector.
BoonDocker
tollfree: 877-522-7805
local: 208-542-4411
fax: 208-524-7381 www.boondockers.com 2
Advertising