BoonDocker ARCTIC CAT: EZ JACKER 1.9 User Manual
Page 3
BoonDocker
tollfree: 877-522-7805
local: 208-542-4411
fax: 208-524-7381 www.boondockers.com 3
7. Locate the stock Boost Solenoid connector
8. Plug the matching EZ-Jacker connectors inline with
the EFI connector.
9. Using a 10 mm wrench remove the nut on the en-
gine side of the Boost Solenoid. Attach the ground
connection on the EZ-Jacker and re-install the 10mm
nut.
10. Install the supplied push button onto the handlebar.
The push button can be installed using a zip-tie as
shown in the image or super glued to the switch pod
bellow the thumb warmer switch.
11. Route the push button wiring down the steering col-
umn to under the hood and connect to the match-
ing connector on the EZ Jacker.
12. Using the supplied velcro attach the EZ-Jacker enclo-
sure to the factory ECU enclosure.