BoonDocker ARCTIC CAT: EZ JACKER 1.9 - Manual (Page 4)

13. It is very improtant to secure the EZ Jacker wiring so that is out of the way of heat and moving parts. Using the supplied
zip-ties we recommend securing the harness in the locations shown above.
BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 4
Returned Goods – No merchandise will be accepted without prior approval. A RMA number (Return Merchandise Authorization)
provided by Boondocker is required before a return will be accepted. A 20% handling and restocking charge will be applied to
returned merchandise. No unauthorized returns will be accepted.
Limited Warranty – Boondocker warrants its product to the original purchaser against workmanship defects for a period of 90
days, commencing from the date of product delivery to the Consumer.
Maximum Liability – The maximum liability of Boondocker in connection with this warranty shall not under any circumstances
exceed the price of the product claimed to be defective.
Three LEDs are located on the EZ-Jacker next to where the wire harness exits the enclosure. These LEDs are used to help identify
possible connection issues.
Green LED on indicates that EZ Jacker has power
Red LED on indicates that the EZ Jacker is receiving a MAP sensor signal
Yellow LED on indicates that the EZ Jacker is receivng a Boost Solenoid signal
If any of the three LEDs are not on while the machine is running check the corresponding connection.
WARRANTY TERMS AND CONDITIONS
Diagnostic LEDs