Cabletron Systems 6C105 User Manual
Page 14
Chapter 1:
Introduction
1-6
6C105 Overview and Setup Guide
Auto-Ranging Power Supplies
The 6C105 power supply modules automatically adjust to the input
voltage and frequency. No additional adjustments are necessary.
Hot Swapping
To reduce network downtime, the power supply modules are also hot
swappable. This allows for the removal of one power supply without
powering down the chassis and interrupting network traffic.
The 6C105 Cooling System
The 6C105 features a removable fan tray that is accessible from the front
of the unit. This unit is hot swappable, which allows it to be replaced
without powering down the chassis. The fan tray has one LANVIEW
LED located on the front of the unit. This LED indicates the status of the
fan tray (normal or fault). Refer to
tray LED states and their definitions.
Rack Mountable Chassis
The 6C105 can be mounted into a standard 19-inch (48.26 cm) equipment
rack. The 6C105 chassis has rackmount brackets built into the chassis for
ease of installation.