Cabletron Systems 6C105 - Manual (Page 9)

6C105 Overview and Setup Guide 1-1
CHAPTER 1
INTRODUCTION
Welcome to the Cabletron Systems 6C105 SmartSwitch 6000 Overview
and Setup Guide . This guide explains how to set up and configure the
Cabletron Systems 6C105 SmartSwitch 6000 chassis.
1.1 USING THIS GUIDE
Read through this guide completely to familiarize yourself with its
contents and to gain an understanding of the features and capabilities of
the 6C105 SmartSwitch 6000. This guide lists the features and options of
the 6C105 SmartSwitch 6000 and explains how to remove and reinstall
the fan tray, and install the power supply(ies), modules and the cable
management bar. A general working knowledge of data communications
networks is helpful when setting up the 6C105 SmartSwitch 6000.
1.2 STRUCTURE OF THIS GUIDE
This guide is organized as follows:
Chapter 1 , Introduction , provides manual organizational information,
how and where to get help, and discusses the features and capabilities of
the 6C105.
Chapter 2 , Installation Requirements and Specifications , lists the
location requirements that must be met before installing the 6C105 in a
cabinet or rack. This chapter also includes some configuration guidelines,
environmental guidelines, and operating specifications for the 6C105 and
related Power Supply Modules.
Chapter 3 , 6C105 Setup , contains instructions for rack mounting the
6C105, removing and reinstalling the fan tray, installing the power
supply(ies), installing a module, installing the cable management bar, and
powering up the 6C105.
NOTE
In this document, the 6C105 SmartSwitch 6000 is referred to
as either the “6C105” or the “chassis”.