Replacing the hood, Figure 17: replace the hood – Dynojet 250: DynoWare EX+ Upgrade User Manual
Page 18
Advertising
DynoWare EX+ Upgrade Installation Guide
D Y N O W A R E E X + U P G R A D E
Installation
12
R
EPLACING
THE
H
OOD
1
Gently place the hood on the dyno leaving the hood propped up.
2
Reconnect the battery.
3
Secure the hood to the dyno using the four bolts removed earlier.
Figure 17: Replace the Hood
Advertising
This manual is related to the following products: