Dynojet 248: Maintenance Guide - Manual (Page 22)

Maintenance Guide for Automotive Dynamometers
A U T O D Y N O M A I N T E N A N C E
4WD Attachment for Model 224 Dynos
18
A DJUSTING THE A IR M OTOR L UBRICATOR
Use the following steps to adjust the amount of oil provided by the air motor
lubricator.
1
Turn the top knob on the air motor lubricator clockwise until it shuts off the flow
of oil.
2 Back off the knob one turn counter-clockwise to start the flow of oil.
3 Adjust the knob as needed between one turn and fully on (turning counter-
clockwise) as needed for the particular environment in your dyno room.
Figure 16: 224 4WD Attachment—Adjust the Air Motor Lubricator
AD206
turn knob
clockwise to shut
off oil, back off one
turn counter-
clockwise to start
the flow of oil