Footswitch features – Eden RS Combos User Manual

Page 8

Advertising
background image

8

Recording Out (D.I.) – This fully balanced XLR output allows you to send
a pre- or post-EQ signal to a recording or sound reinforcement mixing
console. We use Pin 2 hot configuration. Adjusting the Master Volume
control will not affect this send. This output is designed to use with phantom
powered systems. However, it never hurts to turn off the phantom power at
the board, if possible.

Tuner Out – Sends a signal to your tuner. When used in conjunction with
the Mute function, this allows silent tuning. Vocalists and lead guitarists
love this feature. It can also be used to provide pre-tone signal to other
devices such as a direct box or console. The signal is enough to provide
adequate signal to virtually every tuner on the market.

Mono Pre-EQ Effects Send/Return – These standard 1/4-inch jacks allow
you to send and receive your signal to and from external devices. This
effects loop is positioned post (behind) the compressor and before the
Enhance control and the tone section. This loop is at line level; do not use
instrument level effects in this loop as they tend to be overloaded by the
higher signal level which can cause distortion.

FOOTSWITCH FEATURES

As previously stated, the footswitch activates two features not available via
the amplifier itself. We think they both qualify as Really Neat Things.

Mute to Tune – Step on this switch to mute everything except the Tuner
Out. Now you can tune without bothering your singer. Or the audience.
Neat, huh?

Enhance Bypass – Bypassing the Enhance allows you to create two
different tones – one with, and one without Enhance. Then, use this switch
to flip between the two. Even Neater, don’t you think?

ABOUT THE SPEAKERS

Eden is the only bass amplifier manufacturer to design, engineer and build
its own drivers. Designing and building our own speakers and high-
frequency drivers allows us to create far greater synergy between our drivers
and cabinets than any other manufacturer can achieve. We can create several
speaker and/or cabinet prototypes and then test them together to find the best
possible combination. No other manufacturer has this capability, which is
why no other manufacturer can equal Eden’s sound and reliability.

Advertising