ETS-Lindgren 3301C Active Monopole - Manual (Page 23)

4.0 Assembly Instructions
Before connecting any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
The 1/4–20 mount on the bottom of the Model 3301C Active Monopole
Antenna is not a ground location.
See Mounting Instructions on page 31 for information on mounting the
Model 3301C. For information on using the MIL-STD-461F Test Kit,
see page 28.
Counterpoise and Monopole Element
The counterpoise is designed to be placed on top of the Model 3301C. This
prevents the body of the unit from intruding into the field to be measured.
Do not lift the Model 3301C by the
counterpoise.
For protection of the antenna field-effect transistor (FET), it is
recommended that you use an electrostatic discharge (ESD)
wrist strap at an ESD-protective workstation for complete grounding.
1. Place the power
switch in the
OFF/CHG
position.
2. Touch the two
grounding strips
located on top of
the Model 3301C.
Assembly Instructions | 23