Cisco Cisco Unified 7975G - Manual (Page 12)

12
Adjust the Ring Volume
• Press the Up or Down Volume button while the handset is in its cradle.
Select the Ring Type
To change the ringer sound:
1. Press the Settings button.
2. Press 2 for Ring Type, or use the Navigation button to scroll to Ring Type and press the Select soft key.
3. Use the Navigation button to scroll through the list of ring types. Press the Play soft key to hear samples.
4. Highlight the ring you want, and then press the Select soft key.
5. Press the Ok soft key to select your setting.
6. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.
7. Press the Exit soft key to return to the main directory menu.
Adjust the Display Contrast
To adjust the contrast in your LCD display:
1. Press the Settings button.
2. Press 1 for Contrast, or use the Select soft key.
3. Use the Down or Up soft key to change the contrast.
4. Press the Ok soft key.
5. Press the Save or Exit soft key.
6. Press the Ok soft key to select your contrast setting.
7. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.
8. Press the Exit soft key to return to the main directory menu.
Note Press the backspace (<<) soft key to erase digits that you enter incorrectly.
Divert Incoming Calls
To forward any incoming call to the call-forward destination set on the Cisco Unified IP phone:
• Press the DnD soft key.
Note If the call-forward destination is not set, pressing the DnD soft key disables the ringer.
Whisper Intercom
The Whisper Intercom feature allows the user to make an intercom call to a busy extension. The recipient can hear the caller or
hear the whisper intercom, and the original caller on the receiving phone does not hear the whisper intercom. The phone
receiving a whisper intercom displays the extension and name of the party initiating the whisper intercom and a zipzip tone is
played before the called party hears the caller's voice. The receiving party needs to select the intercom line button on their phone
to speak to the caller.
Note For intercom users to know whether the intercom is using one-way or two-way audio, the lamps for both intercom
buttons are colored amber for one-way whisper intercom and green for two-way audio.