Hybrid Racing HR Kswap Cold Air Intake - Manual (Page 7)

Before tightening all of the bolts, check the filter’s position and clearance with the bumper. The bracket is slotted to
allow some minor adjustment of the filter’s position. Put the transmission in 1
st ,3 rd , and 5 th gear and check the
clearance between the transmission’s linkage and the CAI. Figure 11 illustrates proper clearance between the link-
age and CAI. If the linkage hits the CAI before it “clicks” into gear, the CAI may cause the car to come out of gear
while driving (this is true of all CAI’s and even some radiator hoses on k-swaps).
Adjust the bracket as necessary to
achieve the desired clearance between the CAI and transmission counterweight.