Jeep 2009 Wrangler Unlimited - Owner Manual - Manual (Page 112)

2. Remove the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal”
later in this section.
3. Remove the soft top bow assembly pivot bracket
screws (two per side) using a #T30 Torx
௡ head driver.
4. Using a rubber mallet, carefully tap the knuckles from
the left and right metal pivot brackets. Remove the soft
top from the vehicle and store in a clean, dry location.
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
௡
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE