Raising the windshield and replacing side bars, Raising the windshield and replacing side, Bars – Jeep 2009 Wrangler Unlimited - Owner Manual User Manual

Page 192

Advertising
background image

9. Lower the windshield gently until it contacts the
rubber hood bumpers.

10. Secure the windshield by passing a cinch strap
through the footman hoop on the center of the hood and
on the center of the windshield frame. Tighten the strap
to secure the windshield in place.

Raising the Windshield and Replacing Side Bars

1. Raise the windshield.

2. Loosely attach the rear of the side bar to the sport bar.
Refer to Step 4 of “Lowering Windshield And Removing
Side Bars” earlier in this section.

• Reattach the sport bar Velcro௡ covering.

190

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising