Brake system – Jeep 2009 Wrangler Unlimited - Owner Manual User Manual

Page 417

Advertising
background image

• Check the engine coolant (antifreeze) freeze point in

the radiator and in the coolant recovery bottle. If
engine coolant (antifreeze) needs to be added, the
contents of the coolant recovery bottle must also be
protected against freezing.

• If frequent engine coolant (antifreeze) additions are

required, or if the level in the recovery bottle does not
drop when the engine cools, the cooling system should
be pressure-tested for leaks.

• Maintain the engine coolant (antifreeze) concentration

at 50% HOAT engine coolant (antifreeze) (minimum)
and distilled water for proper corrosion protection of
your engine which contains aluminum components.

• Make sure that the radiator and coolant recovery

bottle hoses are not kinked or obstructed.

• Keep the front of the radiator clean. If your vehicle is

equipped with air conditioning, keep the front of the
condenser clean.

• Do not change the thermostat for Summer or Winter

operation. If replacement is ever necessary, install
ONLY the correct type thermostat. Other designs may
result in unsatisfactory cooling performance, poor gas
mileage, and increased emissions.

Brake System

In order to assure brake system performance, all brake
system components should be inspected periodically.
Refer to the “Maintenance Schedule” in Section 8 for the
proper maintenance intervals.

7

MAINTAINING YOUR VEHICLE

415

Advertising