To set a desired acc speed – Jeep 2011 Grand Cherokee - Owner Manual User Manual
Page 174
Advertising
WARNING!
Leaving the Adaptive Cruise Control (ACC) system
on when not in use is dangerous. You could acciden-
tally set the system or cause it to go faster than you
want. You could lose control and have a collision.
Always leave the system off when you are not using
it.
To Set A Desired ACC Speed
When the vehicle reaches the speed desired, push the
SET - button and release. The EVIC will display the set
speed.
Remove your foot from the accelerator pedal. If you do
not, the vehicle may continue to accelerate beyond the set
speed. If this occurs:
• The message “DRIVER OVERRIDE” will display in
the EVIC.
ACC Set
172
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising
This manual is related to the following products: