Rear tail, stop, turn signal, and backup lamps, Rear tail, stop, turn signal, and backup, Lamps – Jeep 2011 Grand Cherokee - Owner Manual User Manual
Page 532
Advertising
Rear Tail, Stop, Turn Signal, And Backup Lamps
1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp housing.
3. Grasp the tail lamp and pull firmly rearward to
disengage the lamp from the aperture panel.
4. Twist socket counter clockwise and remove from
lamp.
5. Pull the bulb to remove it from the socket.
6. Replace the bulb, reinstall the socket, and reattach the
lamp assembly.
530
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: