Karcepts KIM01 - Manual (Page 10)

)
2. INSTALLATION (continued…)
8.
If trying to re-connect the stock water bypass hoses, you may find that they are
too short with the new throttle body position. You can choose to loop the inlet
on the block to eliminate the coolant flow to the throttle body (left image below),
or obtain 5/16” I.D. hose to connect the system in stock fashion (right image
below).
9.
If using a 02-06 RSX/ITR or 02-05 Civic Si/CTR style head, install the 36283-
RAA-A00 vacuum hose from the nipple on top of the intake manifold to the
intake air bypass control thermal valve.