Karcepts KIM01 - Manual (Page 2)

,
Parts Included With K20A/A2/A3/Z1 Throttle Body
To RBC/RRB/RBB Intake Manifold Adapter
DESCRIPTION QTY
INTAKE MANIFOLD ADAPTER 1
M8 SOCKET HEAD CAP SCREW 4
M8 HEX HEAD CAP SCREW 4
M8 LOCK WASHER 4
RUBBER PLUG 2
Tools Required
6mm Allen Wrench
13mm Socket
Additional Parts Needed
Honda P/N: 16176-RBC-004 Throttle Body Gasket
Honda P/N: 16176-PRB-A01 Throttle Body Gasket
Honda P/N: 36283-RAA-A00 Vacuum Hose*
Hondata (or equivalent) K20 Intake Manifold Gasket*
Optional Tools*
Sharpie Marker
Vice
Die Grinder
Metal Cutting Wheel
60 Grit Flap Disk
Drill
15/32” Drill Bit
* Required For Adapting a RBC/RRB Intake Manifold onto a 02-06 RSX/ITR
or 02-05 Civic Si/CTR Style Head.
Note: Read all instructions before attempting installation.
If you do not believe you are qualified in performing the
necessary installation and/or modifications, please find an
experienced professional who can. Karcepts, Inc. will not be
held responsible for improper modifications to your chassis,
engine, or any other associated parts. It is your job to make
certain adequate clearances are provided to fit an RBC or
RRB intake manifold into your vehicle.