Karcepts KIM01 - Manual (Page 3)

)
1. PREPARATION
1. Remove the EVAP hose, brake booster hose, PCV hose, vacuum hose, water
bypass hoses, throttle cable, fuel lines, fuel injector connectors, IAC valve
connector, TP sensor connector, MAP sensor connector, and EVAP canister
purge valve connector from your current intake manifold and throttle body
setup.
2.
Remove the throttle body.
3.
Remove the intake manifold brackets, intake manifold, and intake manifold
gasket.
If adapting an Accord Euro R or 06 Civic Si intake manifold onto an 02-
06 RSX/ITR or 02-05 Civic Si/CTR style head, continue to follow the
remaining “PREPARATION” steps, otherwise skip to “INSTALLATION”.